glenair, inc. ?1211 air way ?glendale, ca 91201-2497 ?818-247-6000 ?fax 818-500-9912 ?2008 glenair, inc. printed in u.s.a. cage code 06324 53 www.glenair.com e- mail: sales@glenair.com banding tools 600-055 calibration key and 600-072-1 standard and 600-086-1 micro gauges 600-072-1 standard tension gauge the 600-072-1 tension gauge is used to check and calibrate the tie-dex ii ? standard hand tool to values noted on calibration sticker. constructed of hardened steel, the gauge's accuracy is within ? lbs. reference: band-it ? part number a48599. metric dimensions (mm) are indicated in parentheses. 600-086-1 micro tension gauge the 600-086-1 micro tension gauge is used to check and calibrate the tie- dex ii ? micro hand tool to values noted on calibration sticker. constructed of hardened steel, the gauge's accuracy is within ? lbs. reference: band-it ? part number a47599. .375 (9.5) approx. calibration sticker .875 (22.2) 3.34 (84.8) .875 (22.2) 2.0 (50.8) red red green green .375 (9.5) approx. calibration sticker .875 (22.2) 3.34 (84.8) .875 (22.2) 2.0 (50.8) red red green green 600-055 calibration key the 600-055 calibration key is designed for use with the 600-061 and 600-058 hand banding tools. material is black anodized aluminum alloy. one full turn clockwise will advance the tension range by 25 lbs., and a counter-clockwise turn will decrease tension by the same amount. recommended for purchase with 600-072-1 and 600-086-1. reference: band-it part number a44699. .50 (12.7) 3.00 (76.2) ref. 1.75 (44.5) ref.
|
